6 Best Pig Nipple Drinkers For Clean Water That Old Farmers Swear By

Nothing sours a morning faster than finding a pig water trough full of mud, feed, and worse. You spend more time cleaning it than the pigs spend drinking from it. This is exactly why nipple drinkers are one of the best small investments you can make on a hobby farm, turning a daily chore into a reliable, clean water source.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Why Clean Water Matters for Healthy Pigs

Clean water is non-negotiable for raising healthy pigs. It drives feed intake, aids digestion, and helps regulate body temperature. A pig that isn’t drinking enough isn’t eating enough, and that means slow growth and a higher risk of health problems.

Contaminated water from an open trough is a breeding ground for bacteria. It’s an open invitation for scours and other illnesses that can spread quickly, especially among younger pigs. A nipple drinker system delivers fresh water on demand, drastically cutting down on the risk of disease transmission.

Think of it this way: every minute you save not scrubbing a filthy water trough is a minute you can spend observing your animals or tackling another farm task. Clean water from a nipple drinker isn’t just about animal health; it’s about your time and efficiency. It’s a simple system that prevents a whole category of common problems before they can start.

Trojan Model 75: The All-Purpose Standard

If you ask a dozen old-timers what nipple drinker to get, half of them will probably say "the blue Trojan one." The Model 75 is a classic for a reason. It’s a simple, reliable, and versatile workhorse that can serve pigs from weaners to finishers.

Its design is straightforward, with a durable brass body and a stainless steel trigger mechanism. There aren’t a lot of complex parts to fail, which is exactly what you want in farm equipment. It provides a good flow rate that satisfies a thirsty sow but isn’t so aggressive that it scares off a newly weaned piglet.

The biggest advantage of the Trojan 75 is its predictability. It’s the go-to choice when you just need something that works without fuss. While other models might specialize in water conservation or durability, the Trojan 75 hits the sweet spot of being good enough for almost any situation on a small farm. It’s the perfect starting point.

Hog Slat Stainless Nipple: Built for Durability

Pigs are tough on equipment, and some water sources can be tough on metal. If you have hard water with high mineral content or just want a nipple that will likely outlast the pen it’s installed in, a full stainless steel model is the answer. The Hog Slat Stainless Nipple is a prime example of build quality paying off.

Unlike brass, which can corrode over time with certain water chemistry, stainless steel is incredibly resistant to rust and mineral buildup. This means the internal valve is less likely to stick or fail, ensuring a consistent water supply. It’s a "set it and forget it" piece of hardware, which is a huge plus.

The initial cost might be slightly higher than a standard brass model, but the longevity makes it a smart investment. Consider it a one-time purchase. For pigs that are particularly "chewy" or like to abuse their surroundings, the robust construction of a solid stainless nipple provides peace of mind that you won’t come out to a broken drinker and a flooded pen.

Lixit L-70 Nipple for Weaners and Piglets

Putting a full-size finisher nipple in a weaner pen is a recipe for dehydration. Small piglets simply don’t have the jaw strength or the know-how to operate a stiff, high-flow nipple. The Lixit L-70 is designed specifically to solve this problem.

This nipple has a much more sensitive trigger mechanism. A gentle nudge or bite from a small snout is all it takes to release a controlled stream of water. This easy activation is critical for teaching young pigs how to drink from a nipple, a skill they need to learn quickly after being moved from the sow.

The L-70 also has a lower flow rate, which prevents water from spraying and startling the piglets. It delivers enough water for them to drink comfortably without creating a wasteful, muddy mess. Using a dedicated piglet nipple for the first few weeks is one of the most effective ways to ensure a smooth transition and a strong start.

Suevia 100P Bite Nipple: Minimizing Water Waste

Have you ever watched a bored pig repeatedly press a nipple drinker just to watch the water run? This "play-drinking" wastes an incredible amount of water and can turn your bedding into a swamp. The Suevia 100P Bite Nipple is engineered to combat this exact behavior.

Unlike standard push-trigger nipples, a bite nipple requires the pig to physically take the entire activator into its mouth and bite down. This action more closely mimics how they would drink from a natural source and makes it nearly impossible to trigger the flow by just bumping it with their snout. The result is a dramatic reduction in water waste.

This is especially valuable in setups with deep bedding or in areas where water conservation is a concern. Drier bedding means less ammonia, a healthier environment, and lower bedding costs over time. While it might take a day for pigs to get the hang of it, the long-term benefits of a drier pen and lower water usage are well worth it.

Tuff Stuff Finisher Nipple: A Solid Value Pick

You don’t always need the most expensive, feature-rich option. Sometimes you just need a solid, reliable piece of equipment that gets the job done without breaking the bank. The Tuff Stuff Finisher Nipple is exactly that—a no-frills, dependable choice for growing and finishing pigs.

It’s typically made with a stainless steel body and a simple, effective valve system. It’s designed to provide the high flow rate that larger pigs need, especially in warmer weather. There are no fancy water-saving features or specialized triggers, just a durable valve that delivers water when a big pig pushes on it.

This is the perfect nipple for outfitting a pen for market hogs or for a temporary setup where you don’t want to invest in premium hardware. It proves that you can get reliable performance for a very reasonable price. For the hobby farmer on a budget, it’s an excellent way to provide clean water without overspending.

Miraco Lil’ Spring 3100: Nipple and Bowl Combo

For some situations, a standard nipple isn’t quite enough. The Miraco Lil’ Spring 3100 combines the on-demand cleanliness of a nipple drinker with the easy access of a small bowl. This hybrid approach offers some unique advantages, particularly for farrowing sows or in hot climates.

The nipple fills a small, cast-iron bowl, providing a small reservoir of water. This encourages drinking, as pigs can see and lap the water, which can be helpful for animals transitioning to a nipple system. The bowl also catches drips, reducing waste and keeping the floor beneath the drinker drier.

The main tradeoff is cleaning. While it stays much cleaner than an open trough, the bowl will still collect some feed and dust from the pigs’ snouts and needs to be wiped out regularly. However, for a sow needing high water intake for milk production or for any pig in summer heat, the easy access and encouragement to drink can be a significant health benefit.

Proper Nipple Drinker Installation and Height

Buying the best nipple drinker on the market won’t do you any good if it’s installed incorrectly. Proper height and angle are critical for ensuring pigs can drink comfortably and for minimizing water waste. An improperly placed nipple can lead to dehydration or a flooded pen.

The general rule is to set the nipple height at the pig’s shoulder level. This forces the pig to approach the drinker with its head up, which is a natural drinking position. If it’s too low, they’ll play with it. If it’s too high, they won’t be able to use it effectively.

• Weaners (25-50 lbs): Set the nipple about 10-12 inches from the floor.
• Growers (50-150 lbs): Adjust the height to 18-24 inches.
• Finishers/Sows (150+ lbs): Aim for a height of 28-32 inches.

The angle matters just as much. For most pen installations, the nipple should be angled downwards at about 45 degrees. This uses gravity to help close the valve and ensures water flows directly into the pig’s mouth. For stall or crate setups, a 90-degree horizontal installation is more common, but the shoulder-height rule still applies. Always check for a steady, drip-free seal after installation.

Ultimately, the best nipple drinker is the one that fits your specific pigs, your setup, and your budget. A simple brass nipple might be perfect for a pair of market hogs, while a water-saving bite nipple makes more sense for a larger group in a deep-bedded pen. The key is to move away from troughs and give your pigs constant access to the clean water they need to thrive.