6 Best Heavy Duty Broom Holders For Chicken Coops That Conquer Coop Chaos

You open the coop door, and the first thing you do is trip over the handle of a shovel you left leaning against the wall. The chickens scatter, the waterer gets knocked, and your morning chores start with a mess. A well-organized coop isn’t about aesthetics; it’s about efficiency, safety, and making your daily tasks smoother.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Gladiator GearTrack: The Ultimate Coop Rail System

The Gladiator system is less a single holder and more a complete organizational framework. You mount a heavy-duty rail (the "GearTrack") to the wall of your coop or the adjoining feed shed, and then various hooks and holders clip into it. This modularity is its greatest strength.

Think about your seasonal tool needs. In summer, you might need a rake and a shovel front and center. In winter, that might change to a heavy-duty scraper for frozen droppings and a snow shovel. With a rail system, you can slide attachments around in seconds without drilling new holes. It’s an investment, but it adapts with you.

The real advantage for coop life is its sheer strength. These systems are designed for garages holding power tools and ladders, so a manure fork, a wide shovel, and a heavy push broom are no challenge. If you have a walk-in coop and a collection of long-handled tools, this is the buy-it-once solution. Just be sure you have solid studs to mount it to; a flimsy coop wall won’t cut it.

Rubbermaid FastTrack for Heavy-Duty Coop Tools

Rubbermaid’s FastTrack is a direct competitor to Gladiator and operates on the same principle: a steel rail mounted to the wall with a variety of click-in hooks. It’s another excellent choice for organizing more than just a single broom. It easily handles the weight of pitchforks, wide scoop shovels, and even wheelbarrows.

Where FastTrack often shines is in its availability. You can find these systems at most big-box hardware stores, making it easy to grab an extra hook when you need one. The variety of attachments is also impressive, with specific hooks designed for shovels, multi-tool racks, and general-purpose hangers.

The primary consideration is the same as any rail system: you need a sturdy wall. Mounting this on the inside of a cheap, thin-walled coop kit is asking for trouble. It’s best suited for a well-built shed-style coop or on the exterior wall under an eave, where your tools are protected but out of the way. It’s a fantastic way to get everything up off the floor and away from moisture and manure.

Berry Ave Organizer: Top Grip for Coop Brooms

The Berry Ave organizer is a different beast entirely. It’s a single, wall-mounted strip with a series of spring-loaded, rubber-gripped clamps and a few small hooks. You push a handle into the clamp, and it locks in place. This design is incredibly effective for standard broom and rake handles.

Its strength is its simplicity and space efficiency. You can mount a single 16-inch strip and hang five long-handled tools and a few smaller items like dustpans or whisk brooms. The rubber grips are key here, as they hold onto dusty or slightly damp handles much better than simple plastic clips.

However, it has its limits. This is not the solution for your heaviest, most awkward tools. A heavy steel pitchfork or a wide, metal grain scoop might be too much for the spring mechanism over time. It excels with standard cleaning tools: the coop broom, the dustpan, a small rake, and maybe a lightweight scraper. For a smaller coop with basic cleaning needs, it’s a near-perfect, affordable option.

Impresa Holder: Stainless Steel Rust Resistance

The Impresa holder looks similar to many other ball-and-clip style organizers, but it has one critical feature: it’s made of stainless steel. In the humid, ammonia-rich environment of a chicken coop, this is not a small detail. Rust is the enemy of any metal fixture in a coop.

Ammonia from chicken droppings is corrosive. Over time, it will eat away at cheap plated steel, causing it to rust, weaken, and fail. A stainless steel holder resists this corrosion, ensuring it will last for years without becoming a rusty eyesore or dropping a shovel on an unsuspecting hen. The self-adjusting grips can handle a surprising amount of weight, too.

This is the choice for anyone who has seen other metal hardware fail in their coop. It’s a practical, long-term decision. You might pay a little more upfront, but you won’t be replacing it in two years when it’s covered in rust spots. Think of it as coop infrastructure, not just a simple tool hook.

Ultrawall Rack for Storing Shovels and Rakes

The Ultrawall rack is a heavy-duty, fixed storage system. Unlike the modular Gladiator or Rubbermaid tracks, this is typically a solid steel rack with fixed hooks of various sizes. It’s built for one purpose: holding a lot of heavy stuff without compromise.

This is the system you get when your primary concern is weight. If your tool collection includes multiple heavy shovels, a pitchfork, a tamper for dirt floors, and a broadfork, the Ultrawall provides peace of mind. The long, rubber-coated pegs can hold multiple tools each, making it incredibly dense storage.

The tradeoff is a lack of flexibility. You can’t easily reconfigure the hooks. You mount it once and your storage layout is set. This makes it ideal for a permanent "tool wall" in your feed shed or barn, rather than inside a smaller coop where your needs might change. It’s overkill for a couple of brooms but perfect for the serious hobby farmer’s full arsenal.

ONMIER Mop Broom Holder for Compact Coop Spaces

The ONMIER holder is a great example of a compact, ball-clamp style organizer. It’s typically a short metal or plastic strip with two or three rubber-lined slots and a few small hooks. You push the handle in, and a rolling ball wedges it securely in place.

This design is perfect for tight spaces. If you have a small coop and only need to hang a broom and a scraper, a full rail system is a waste of space and money. A small, three-slot holder like this can be mounted on a single stud between the nesting boxes and the door, keeping your essential tools right where you need them without creating an obstacle.

The key is to manage expectations. These are not designed for heavy, off-balance tools. They are perfect for:

• Standard brooms
• Small hand rakes
• Manure scrapers with standard handles
• Dustpans on the integrated hooks

Don’t try to hang your heaviest steel shovel on it. Use it for the daily cleaners, and it will serve you well.

Stalwart Tool Holder: A Simple, No-Frills Option

Sometimes, you just need something that works without costing a fortune. The Stalwart tool holder is the definition of a basic, functional organizer. It’s usually a simple plastic bar with a series of friction-fit clips designed to hold standard-diameter tool handles.

There are no fancy springs or rubber grips here. It holds tools through simple pressure. This makes it incredibly affordable and surprisingly durable, as there are fewer moving parts to break or clog with dust and feathers.

This is a great option for a secondary tool station or for someone on a tight budget. Maybe you have a main rack in the shed but want one hook inside the run for a rake. The Stalwart gets the job done. Just know that its grip is less secure than spring-loaded models, so it might struggle with very smooth-handled or heavy tools.

Home-it Mop Holder: Secure Ball-Grip Design

The Home-it holder uses the popular "marble and rubber" or ball-grip design, which provides a surprisingly strong hold. As you push the handle up into the slot, a weighted ball rolls down and wedges the handle against a rubber backstop. Gravity does all the work, creating a very secure grip.

This mechanism is fantastic for preventing tools from sliding down, a common issue with simple friction clips, especially with dusty handles found in a coop. It can confidently hold a moderately heavy tool, like a standard garden rake or a lightweight shovel, without slipping. Most models are built on a sturdy aluminum rail, offering a good balance of strength and rust resistance.

Consider this a solid middle-ground option. It’s more secure and robust than the most basic plastic clip holders but less expensive and complex than a full rail system. For the average chicken keeper with a broom, a rake, and a scraper, this type of holder is often the sweet spot of price, performance, and durability.

Ultimately, the best broom holder is the one that gets your tools off the coop floor. Whether you choose a robust rail system or a simple set of clips, organizing your tools saves you time, prevents accidents, and brings a little bit of order to the wonderful chaos of keeping chickens. Stop tripping over that shovel and get it on the wall.