7 Best Wall Mount Feed Bins For Small Stalls

Struggling with wasted grain or a stall full of kicked-over buckets can turn a simple morning chore into a frustrating battle against gravity and animal behavior. Proper stall management hinges on equipment that stays put, keeping expensive feed off the barn floor and out of the bedding. Investing in the right mounting system now saves significant money and labor throughout the changing seasons.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Little Giant Corner Feeder: Best Overall Pick

The Little Giant corner feeder is the gold standard for small stall efficiency. Its triangular design fits snugly into tight corners, utilizing otherwise dead space while staying out of the way of the animal’s movement. By mounting securely to both wall studs, it minimizes the risk of accidental dislodging during a hungry animal’s initial rush to eat.

Construction quality is the primary reason this remains the go-to choice for most hobbyists. The heavy-duty molded plastic is built to withstand repeated impacts from horses, goats, or alpacas without cracking or warping under pressure. Its deep basin also prevents grain from being tossed out during aggressive feeding times, a common issue with shallower, open-faced troughs.

For those who prioritize a low-maintenance setup, this feeder is an easy win. It requires minimal hardware to install and holds up against the wear and tear of a working farm. If the goal is a reliable, “install-and-forget” solution that fits almost any standard stall configuration, this is the definitive pick.

Tuff Stuff Products EZ Feeder: Top Budget Buy

When outfitting multiple stalls on a tight budget, the Tuff Stuff Products EZ Feeder provides professional-grade durability without the premium price tag. While it may lack the bells and whistles of high-end specialized feeders, it excels at the fundamentals of holding feed securely. Its rounded edges and robust polyethylene material ensure it won’t break when subjected to standard stall traffic.

The mounting holes are pre-molded, which simplifies installation for someone working alone with basic hand tools. Because the unit is lightweight, it is easy to shift if barn plans change or if a specific stall needs a temporary feeding station. It serves as a perfect solution for seasonal rotation where flexible, inexpensive hardware is required.

While this feeder is an excellent value, it may not be the best choice for animals prone to intense destructive behaviors. For livestock that prefer to chew or lean heavily on equipment, the plastic is resilient but not indestructible. For general-purpose feeding where cost-effectiveness and functionality are balanced, this is the smartest entry-level investment.

High Country Plastics Feeder: Most Chew-Proof

Livestock with a habit of chewing on plastic fixtures can quickly destroy a standard feeder, leading to sharp, dangerous edges. High Country Plastics addresses this with a design that emphasizes durability and a lack of tempting, chewable protrusions. This feeder is specifically engineered for animals that treat their equipment as a plaything rather than just a feed source.

The structural integrity of this unit is significantly higher than average, featuring reinforced wall-mounting points that prevent the plastic from tearing away from screws. Even in a stall with high-energy livestock, the material holds up remarkably well against biting and rubbing. It represents a long-term investment that reduces the frequency of replacement cycles.

If persistent chewing has been a recurring issue in the barn, this feeder is the corrective action required. While the initial price point is higher, the cost is justified by the peace of mind gained from knowing the equipment won’t be shredded in a single season. It is the definitive choice for the destructive, curious, or bored animal.

Fortiflex Rubber Feeder: Easiest to Sanitize

Sanitation is the cornerstone of animal health, and the Fortiflex rubber feeder is uniquely suited for maintaining a clean, bacteria-free environment. Unlike hard plastic, which can develop microscopic cracks that harbor mold and debris, the flexible rubber material is resistant to buildup and incredibly simple to hose down. A quick spray or scrub brings the surface back to a pristine state in seconds.

The flexibility of the rubber also offers a safety advantage; if an animal leans into it forcefully or strikes it, the feeder flexes rather than snapping. This reduces the risk of injury and extends the life of the feeder significantly. In barns where hygiene is a priority, such as those housing animals with sensitive digestive tracts, the ease of cleaning is an unmatched benefit.

Maintenance-heavy environments benefit most from this selection. The rubber is resilient against extreme temperature shifts, meaning it stays pliable in winter and doesn’t get brittle in the heat. For those who want to minimize the time spent on barn chores while maximizing health standards, this rubber feeder is the superior choice.

Miller Manufacturing Mini Feeder: Ideal for Minis

Small-scale livestock, such as miniature horses, goats, or lambs, require equipment scaled to their anatomy. A standard-sized feeder is often too high for smaller animals, leading to neck strain or difficulty reaching the bottom of the bin. The Miller Manufacturing Mini Feeder is intentionally sized to meet these specific ergonomic needs, ensuring a comfortable reach during every meal.

The low-profile design prevents smaller animals from needing to climb or stand on hind legs to feed, which can prevent accidental slips and falls. The mounting hardware is also scaled down to ensure a secure, flush fit against stall walls that might be too narrow for full-sized equipment. It is a focused solution for a specific group of animals that are often overlooked by general agricultural catalogs.

If the herd consists of smaller breeds, there is no substitute for this dedicated design. Attempting to make standard equipment work often results in wasted time and potential safety hazards. This feeder is recommended for anyone managing a miniature herd who wants to ensure long-term health through proper ergonomics.

Weaver Leather Slow Feed: Best for Hay Saving

Hay waste is one of the most common drains on a hobby farmer’s resources, especially when wind or animal behavior turns expensive flakes into trampled bedding. The Weaver Leather Slow Feed system is engineered to regulate intake and force the animal to eat at a measured pace. By mimicking a natural grazing position, it prevents the animal from grabbing large mouthfuls and tossing them onto the floor.

The mesh or grate system acts as a barrier that slows consumption and keeps the hay contained. This is particularly effective for horses or goats that are prone to bolting their food or pulling hay out of the rack in frustration. Over the course of a year, the reduction in wasted hay often pays for the cost of the unit itself.

This product is essential for the hobbyist looking to maximize efficiency and reduce feed costs. It is not just a feeder; it is a management tool that promotes better digestive health by lengthening the feeding process. For those struggling with high hay bills and messy stalls, this is the most practical solution available.

Behlen Country Galvanized Feeder: Best for Goats

Goats are notoriously tough on equipment, often climbing on, rubbing against, and aggressively bumping anything within reach. The Behlen Country Galvanized Feeder is constructed from heavy-duty metal, providing a level of structural rigidity that plastic cannot match. Its galvanized coating prevents rust, even when exposed to the high humidity often found in small, occupied barns.

Metal feeders are the preferred choice for ruminants that require durable equipment that won’t move when pushed or butted. The smooth, galvanized finish is also easy to wipe clean, and the sturdy mounting brackets ensure that it remains attached to the wall regardless of the activity level inside the stall. It stands up to the rigors of goat-rearing in a way that remains unmatched by lighter-weight materials.

While metal can be noisier than plastic, the durability gained is well worth the trade-off. If the livestock are large or particularly energetic, moving to a metal fixture is a wise decision. This feeder is highly recommended for anyone who has experienced broken plastic or snapped hinges in the past.

How to Choose the Right Feeder Mounting Height

Mounting height is rarely a one-size-fits-all calculation. As a general rule, the rim of the feeder should sit at the approximate height of the animal’s chest to prevent them from hitting their knees or struggling to reach the bottom. For most goats and mini-horses, this is typically between 24 and 30 inches, though breed-specific adjustments are always necessary.

Always test the height by observing the animal while they are standing in a natural position. If the head is held too high, the neck will strain; if held too low, the animal may be tempted to try to climb into the feeder. Always account for the bedding depth, as a thick layer of straw or shavings can effectively raise the animal and necessitate a higher mounting point.

Consistency is key for the animal’s comfort and digestive health. Once the optimal height is determined, mark the wall permanently. Adjusting the feeder based on growth stages or changing bedding types is a small step that prevents long-term postural issues for the herd.

Choosing Your Feeder: Plastic vs. Metal vs. Rubber

The choice between plastic, metal, and rubber often comes down to the temperament of the livestock and the local climate. Plastic is lightweight and cost-effective, but it is susceptible to damage from aggressive chewers and can become brittle in sub-zero temperatures. It is the best choice for docile, well-behaved animals in temperate environments.

Metal offers the best longevity and resistance to destruction, making it the choice for hardy animals like goats or bulls. However, metal requires careful installation to ensure no sharp edges are exposed, and it must be galvanized to prevent oxidation. It is a heavier investment but usually results in fewer replacement purchases over the long run.

Rubber provides the middle ground, offering durability without the rigidity of metal or the brittleness of plastic. It is the quietest and safest option for stalls where animals are prone to bumping into walls. When deciding, evaluate the animal’s personality and the stall environment first; a durable choice now saves the cost of a replacement later.

A Simple Cleaning Routine for Your Feed Bins

A consistent cleaning routine is the simplest way to prevent feed contamination and maintain herd health. Once a week, remove all residual grain or fines from the bottom of the bins. Even small amounts of old, damp grain can become a breeding ground for mold and bacteria, which can lead to respiratory or digestive issues.

For plastic and metal feeders, use a mild, livestock-safe detergent and a stiff-bristled brush. Scrub away any stuck-on debris and rinse thoroughly with clean water, allowing the bin to air dry completely before refilling. If the feeder has corners or deep ridges, pay extra attention to these areas where gunk tends to accumulate.

For the rubber feeders, a high-pressure hose is often sufficient to remove most debris, though an occasional scrub is still beneficial. Never use harsh chemicals or ammonia-based cleaners, as these can leave residues that are toxic or distasteful to the animals. Keeping a simple, weekly schedule ensures the feeding station remains a source of nutrition rather than a liability.

Selecting the right wall mount feeder is a foundational step in creating an efficient, low-stress barn environment. By balancing the specific needs of the herd with the durability of the materials, the daily routine becomes significantly smoother and more cost-effective. Investing in the correct gear today ensures the farm remains a productive, well-managed operation for seasons to come.