6 Best Inkbird Temperature Controllers for Incubators

That feeling in the pit of your stomach when you realize the incubator temperature spiked overnight is something every poultry keeper dreads. A successful hatch hinges on stability, and even the best-laid plans can be undone by a faulty thermostat or a sudden change in ambient room temperature. This is where precise, automated control becomes not just a luxury, but a necessity for consistent results.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Inkbird ITC-308: The Reliable Foundation

The standard Inkbird ITC-308 is the workhorse of DIY incubation. It’s a simple, dual-stage temperature controller that acts as an external thermostat for your heat source. You plug your heater into one outlet and an optional cooling fan into the other, set your target temperature, and it does the rest.

Its primary job is to prevent the two most common disasters: overheating and chilling. The built-in thermostat on many budget incubators can be wildly inaccurate, with swings of several degrees. The ITC-308 bypasses that internal thermostat, using its own more sensitive probe to turn the heat source on and off with much greater precision. This tight control is the difference between a full hatch and a tray of failed eggs.

This model is the perfect starting point. It solves the single biggest variable in incubation—temperature—without any complex setup. If you’re building an incubator from a cooler or upgrading a basic Styrofoam model, this is the first piece of equipment to buy.

Inkbird ITC-308-WIFI for Peace of Mind

The ITC-308-WIFI does everything the standard model does, but adds a critical feature: connectivity. By linking to your home’s WiFi network, it sends real-time temperature data and alerts directly to your smartphone. This isn’t just about convenience; it’s about disaster prevention.

Imagine you’re at work and a power flicker trips the breaker to your incubator. Without a connected device, you wouldn’t know until you got home, likely hours too late. The WiFi model will send you an offline alert, giving you a chance to call a neighbor or race home to save the hatch. It can also warn you if the temperature deviates from your set range for any reason, like a failing heat lamp.

This upgrade is for the hatcher who can’t be home 24/7. The extra cost is minimal when weighed against the value of a clutch of rare-breed eggs or the emotional investment in a 21-day incubation period. It transforms your incubator from a fire-and-forget box into a monitored system.

Inkbird IHC-200 for Stable Humidity Levels

Temperature gets all the attention, but improper humidity is just as deadly. Too low, and the chicks become "shrink-wrapped," unable to break through a tough inner membrane. Too high, and they can drown in the shell. The Inkbird IHC-200 is the humidity-control equivalent of the ITC-308.

Like its temperature-focused cousin, the IHC-200 is a dual-stage controller. You plug a humidifier into one outlet and a dehumidifier (or, more commonly, an exhaust fan) into the other. It uses its probe to maintain the relative humidity (RH) within a tight range, automatically adding moisture or venting it as needed.

This device is essential for anyone incubating in a space with fluctuating ambient humidity, such as a basement or garage. It takes the guesswork out of managing water channels and sponges. During the final three days of lockdown, when humidity needs to be raised significantly, the IHC-200 makes the process automatic and stress-free.

Inkbird ITC-308T for Simulating Temp Drops

The ITC-308T introduces a timer function to the standard temperature controller. This allows for more advanced incubation techniques, particularly for waterfowl like ducks and geese. In nature, the mother bird leaves the nest daily to eat and drink, causing the eggs to cool for a short period.

This controller lets you program those cooling periods automatically. You can set it to turn off the heat source for, say, 15 minutes once every 24 hours. Some breeders believe this daily temperature drop, or "periodic cooling," strengthens the embryos and leads to more vigorous, successful hatches for certain species.

Is this necessary for chicken eggs? Generally, no. But for the hobbyist looking to optimize hatches for more demanding species, the ITC-308T provides a level of control that mimics natural processes more closely. It’s a specialized tool for a specific purpose.

Inkbird IBS-M1 Gateway for a Connected Hatch

While the WiFi controllers are great, they only monitor the spot where their probe is located. The Inkbird IBS-M1 Gateway acts as a bridge, connecting multiple, smaller Inkbird Bluetooth sensors to your WiFi network. This allows you to build a more comprehensive monitoring system.

You can place several small, inexpensive Bluetooth hygrometers (like the IBS-TH2) in different parts of a large incubator to check for hot spots or uneven humidity. The M1 Gateway collects the data from all of them and sends it to your phone via the app. You get a complete picture of the conditions inside, not just a single data point.

This setup is for the data-driven farmer. It provides detailed graphs and exportable logs, which are invaluable for troubleshooting a failed hatch. By analyzing the data, you can identify if a corner of your incubator is too cool or if humidity dropped at a critical moment.

Inkbird ITH-20R for At-a-Glance Readings

Sometimes, you just want to know the numbers without opening an app or even the incubator door. The Inkbird ITH-20R is a simple and effective wireless thermometer and hygrometer. It consists of a remote sensor that you place inside the incubator and a base station with a large LCD screen that you can keep on a nearby shelf.

The value here is in maintaining stability. Every time you open the incubator to check a thermometer, you cause a massive drop in both temperature and humidity, stressing the embryos. With the ITH-20R, a quick glance at the base station tells you everything you need to know.

This is not a controller; it only reads and displays the conditions. However, it’s an excellent companion to a controller like the ITC-308. You can use the ITC-308 to manage the heat, and the ITH-20R to provide an independent, at-a-glance reading without disturbing the environment.

Combining ITC-308 & IHC-200 for Full Control

For the ultimate DIY incubator setup, you use the ITC-308 for temperature and the IHC-200 for humidity, running them side-by-side. This pair creates a fully automated environment where the two most critical variables are independently and precisely managed. Your only job is to keep the humidifier filled with water.

This combination turns a simple cooler or cabinet into a machine that can rival expensive commercial units. The ITC-308 will cycle your heat lamp, while the IHC-200 cycles your humidifier and exhaust fan. Together, they create the stable, consistent environment that developing embryos need to thrive.

This two-device system is the gold standard for serious hobbyists. It removes nearly all the manual fussing and worry from incubation. You set your desired parameters for each stage of development and let the controllers handle the minute-to-minute adjustments.

Calibrating Your Inkbird for Hatch Success

An uncalibrated controller is just a guess. Out of the box, any digital thermometer or hygrometer can be off by a few degrees or percentage points, and in incubation, that’s a huge margin of error. Calibrating your Inkbird probes against a known, accurate source is the most critical step for success.

To do this, you need a reliable reference thermometer and hygrometer—something you trust to be accurate. Place the reference device’s sensor right next to the Inkbird probe inside the incubator and let them sit for several hours to stabilize. Compare the readings.

If your trusted thermometer reads 99.5°F but the Inkbird reads 100.5°F, you’ll use the "CA" (Temperature Calibration) setting on the ITC-308 to enter a value of -1.0. If your hygrometer reads 55% RH but the Inkbird reads 52%, you’ll use the "RH" (Humidity Calibration) setting on the IHC-200 to enter a value of 3. This simple adjustment ensures your controller is working with accurate data, which is the foundation of a successful hatch.

Ultimately, success in incubation comes down to removing variables. Each of these tools is designed to automate a critical task, freeing you from constant worry and manual adjustments. By choosing the right combination for your needs, you can create a stable and reliable environment that gives every viable egg the best possible chance to hatch.